IPS Logo

Sintofoil ST Membrane
   

Moulded Accessories

1. DESCRIPTION

Prefabricated items obtained by injection moulding of TPO/FPA (Flexible Polypropylene Alloy) granules.

2. STANDARD PRODUCTS*

  • a. Inside corner 100 mm/side.
  • b. Outside corner 100 mm/side.
  • c. Pipe seal Ø (mm) 20 - 50 / 34 - 90 / 75 - 125.
  • d. Roofdrain straight Ø (mm) 80 / 100 / 125.
  • e. Leafgrate for straight roofdrain
  • f. Leafgrate for straight roofdrain
  • g. Roofdrain conical Ø (mm) 75 / 100 / 125 / 140 / 160 / 200.
  • h. Leafgrate and ring for conical roofdrain
  • i. Scupper (mm)100 x 65
  • j. Air vent Ø (mm) 75
  • k. Standing seam profile (2m length)

* Other products available on special order.Minimum quantities apply.

3. STANDARD COLOURS*

  • Corners and pipe seals: grey.
  • Roofdrains,scupper and vent: black.
  • Standing seam profile: grey,lead grey

* Other colours available on special order.Minimum quantities apply.

4. PACKAGING

  • Corners:100 each/carton.
  • Pipe seals:25 each/carton.
  • Roofdrains straight (Ø 80-100):25 each/carton
  • Roofdrains straight (Ø 125):20 each/carton
  • Leafgrate for straight roofdrain:50 each/carton
  • Leafgrate for straight roofdrain:50 each/carton
  • Roofdrain conical (Ø 75):25 each/carton
  • Roofdrain conical (Ø 100-125):20 each/carton
  • Roofdrain conical (Ø 140-160):15 each/carton
  • Roofdrain conical (Ø 200):12 each/carton
  • Leafgrate and ring for conical roofdrain:40 each/carton
  • Scupper:20 each/carton
  • Air vent:20 each/carton
  • Standing seam profile:500 each/pack

5. APPLICATION

  • Corners:weld the entire surface to the base membrane.
  • Pipe seals:weld the flange to the base membrane.A clamping ring type termination,using Waterstop Mastic and Rubber Sealant is required.
  • Roof drains:weld the field membrane to the entire flange area. A min.40 mm weld in any direction is required.
  • Standing seam profile:weld the base of the profile to the membrane.
  • Refer to Rubberfuse specifications and details.



cleangreen